Tuhorse Solar Pumps Review: Are They Any Good?
Tuhorse solar pumps are good value for house tanks, stock troughs and small irrigation, and the Tuhorse 4S1000 package at $4,993 is the one most bore owners should buy. The kits arrive complete with panels, an MPPT controller, 40 metres of cable, bore and tank sensors and a spare rotor, and the published flow figures are honest enough to size from. They are not a premium brand. The warranty is 24 months back to base, and you still need to buy panel frames, a safety cable and poly pipe.
That is the verdict. Below is what each model actually does, who should buy which one, and where they fall short.
Quick picks from the Tuhorse range
Most bores, 10 to 120m: Tuhorse 4S1000 + 1600W panels, $4,993
3 inch casing, 20 to 80m: Tuhorse 3S500 + 800W panels, $3,448
Cloudy regions, big demand: Tuhorse 4H2200 AC/DC hybrid + 3800W panels, $6,648
What Tuhorse is
Tuhorse is a solar pump brand that sells complete off grid pumping kits: stainless steel submersible bore pumps, surface jet pumps, pool pumps and a sewage pump, each matched to monocrystalline panels and an MPPT control box. The range covers 2, 3 and 4 inch bore pumps from 210W to 3000W, in helical rotor and centrifugal versions, plus an AC/DC hybrid that can also run from a generator or mains.
The Tuhorse pitch is simple: one box, everything matched, nothing to work out. For most people buying a first solar bore pump, that is exactly the right pitch. Mismatched panels and controllers cause more solar pump failures than bad pumps do.
Tuhorse solar bore pump specs compared
The Tuhorse bore range runs from a 210W 3 inch pump for shallow bores to a 3000W 3 phase centrifugal pump moving 12,000 litres an hour. The figures below come from the published flow tables for each package.
| Model (package) | Pump | Panels | Suits | Flow at head | Price |
|---|---|---|---|---|---|
| 3S210 | 3 inch, 210W 36V, helical | 400W | 20 to 40m bores | 22 L/min at 10m, 8 L/min at 40m | $2,398 |
| 2S370 | 2 inch, 370W 36V, helical | 400W | 3 inch casings, up to 80m | 33 L/min at 10m, 10 L/min at 80m | $2,648 |
| 3S500 | 3 inch, 500W 48V, helical | 800W | 20 to 80m bores | 30 L/min at 20m, 20 L/min at 50m, 7 L/min at 80m | $3,448 |
| 4S1000 | 4 inch, 1000W 110V DC, helical | 1600W | 10 to 120m bores | 55 L/min at 10m, 40 L/min at 60m, 12 L/min at 120m | $4,993 |
| 4S1000C | 4 inch, 1000W, centrifugal | 1600W | Shallower bores, higher flow | 80 L/min at 10m, 58 L/min at 50m, 15 L/min at 100m | $4,993 |
| 4H2200 | 4 inch, 2200W AC/DC hybrid, helical | 3800W | Deep bores, cloudy regions | Max 220m head, max 5,400 L/hr | $6,648 |
| 4S3000C | 4 inch, 3000W 3 phase, centrifugal | 4750W | Irrigation, large stock systems | Max 130m head, max 12,000 L/hr | $8,198 |
Prices current as of November 2026, AUD including GST, for the complete package with panels. Flow figures are the published package ratings in full sun. Every model carries a 24 month back to base warranty on the pump and control box.
What Tuhorse gets right
Tuhorse gets the complete kit right: panels, controller, cable and sensors are matched at the factory, so the pump sees the voltage it was designed for. That matters more than any single spec. A 1000W pump on a random second hand array is a lottery. A 1000W pump on 1600W of matched panels is a system.
The MPPT controller is genuinely useful. It takes a bore sensor and a tank sensor, so the pump stops when the bore draws down and again when the tank is full. Dry running kills helical rotor pumps, and the bore sensor is the cheapest insurance against it. Motor speed is adjustable and low power protection is built in.
Helical rotors pump in weak light. The helical models hold pressure at low speed, so they keep moving water in the early morning and late afternoon instead of only around midday. On a deep bore, that is several extra hours of water a day.
A spare rotor comes in the box on the helical models. The rotor is a wear part, and having one on the shelf turns a dead pump into a two hour job.
The flow tables are usable. Each package lists flow at every 10 metres of head, so you can size against your actual pumping level rather than a headline maximum.
Where Tuhorse falls short
Tuhorse falls short on warranty, on what is left out of the box, and on depth limits that are easy to miss. None of these is a deal breaker. All of them should be known before you order.
24 months, back to base. If the pump or controller fails inside warranty, it comes out of the bore and goes back for assessment. On a station bore that is a day of work plus the trough running dry. Premium brands like Grundfos SQFlex and Lorentz carry a lot more brand support, and they are priced like it.
No panel frames, posts, safety cable or poly pipe. The package covers pump, panels, controller, cable and sensors. You still need frames and mounting posts for the panels, a stainless steel safety cable to hang the pump, and poly pipe from the pump to the tank. Budget a few hundred dollars and a weekend.
Submersion depth limits. The 4S1000 pump should not sit more than 30 metres below the water surface, even though it lifts from 120 metres. The 4H2200 is rated to 100 metres of submersion. Read the limit for your model before you drop it.
The 2 inch pump is a compromise. The 2S370 fits 3 inch casings, but Tuhorse itself says a 3 or 4 inch pump is the better choice where the casing allows, because the rotor is stronger and lasts longer.
Pure DC models slow down in cloud. Every DC solar pump does. If your district gets week long grey spells in winter, look at the 4H2200 hybrid or a bigger tank.
Which Tuhorse package to buy
Buy the package with panels unless you already own a matched array of the right voltage. The pump and controller only versions save money on paper, for example $2,398 for the 4S1000 pump and controller against $4,993 for the 1600W package, but the panels then become your problem to match.
Then pick the pump by casing, depth and daily litres:
3 inch casing, house tank or small mob: the 3S500 with 800W of panels. It delivers 20 L/min at 50 metres, which is about 7,200 litres in a 6 hour winter day.
4 inch casing, most farm bores: the 4S1000 with 1600W of panels. It covers 10 to 120 metres and delivers 40 L/min at 60 metres. Take the 1600W kit over the 800W kit at $3,898. More panel means more pumping hours, and panels are the cheapest part of the system.
Shallow bore, high flow: the 4S1000C centrifugal. It moves 80 L/min at 10 metres but falls away faster with depth than the helical model.
Cloudy winters or a big herd: the 4H2200 AC/DC hybrid, which runs from a generator or mains when the sun does not show up.
Not sure of your total head? It is the pumping water level, plus the lift from the bore head to the top of the tank, plus pipe friction. Our guide to the best solar bore pumps in Australia walks through it, and the wider best solar water pumps shortlist covers ponds, dams and pools.
Tuhorse beyond bore pumps
Tuhorse also makes solar surface jet pumps, a solar pool pump and a solar sewage pump, all sold as kits with panels. The 500W surface jet package ($3,348) pressurises a house or shed line from a tank or shallow bore. The 600W solar pool pump package ($3,598) runs pool filtration through the day off four 200W panels. Same controller logic, same 24 month warranty.
Prefer mains power? Tuhorse also builds 240V and 415V submersible bore pump packages in our submersible bore pumps range.
Frequently asked questions
Are Tuhorse solar pumps any good?
Tuhorse solar pumps are good value for house tanks, stock water and small irrigation in Australia, because they come as complete matched kits with panels, an MPPT controller with bore and tank sensors, and a spare rotor on helical models. Their main limits are a 24 month back to base warranty and panel frames, safety cable and poly pipe not being included.
What warranty do Tuhorse solar pumps have?
Tuhorse solar pumps carry a 24 month back to base warranty on the pump and the control box. A faulty pump has to be pulled from the bore and returned for assessment, so keep the receipt and the installation details.
Which Tuhorse solar pump is best for a 4 inch bore?
The Tuhorse 4S1000 package with 1600W of panels is the best Tuhorse pump for most 4 inch bores, covering 10 to 120 metres of head at up to 55 L/min for $4,993 as of November 2026. For shallow bores needing more flow, the 4S1000C centrifugal version delivers 80 L/min at 10 metres for the same price.
Do Tuhorse solar pump kits include panel mounts?
Tuhorse solar pump kits do not include panel frames or mounting posts, a stainless steel safety cable, or poly pipe from the pump to the tank. The kits include the pump with 40 metres of fitted cable, the solar panels, the MPPT control box and the bore and tank sensors.
Can a Tuhorse solar pump run on cloudy days?
Tuhorse DC solar pumps keep running on cloudy days at reduced flow and stop at night. The Tuhorse 4H2200 AC/DC hybrid can also run from a generator or mains power, which makes it the better choice in districts with long cloudy spells in winter.
Want help picking the right Tuhorse kit?
Send us your bore depth, standing water level, casing size, tank height and how many litres a day you need. We will match the pump and panel array and tell you straight if a Tuhorse is not the right fit.
Get a solar pump recommendation
This review is general information for Australian property owners, based on the published specifications and product listings, and is not a substitute for advice on your specific bore and site. Electrical work must be done by a licensed electrician, and bore work by a licensed driller where your state requires it. Confirm final sizing with us before you buy. Prices and specifications are current at the date of publication and change without notice.