Commercial and Project Pump Station Supply
Send us the hydraulic drawings or a duty point and we will size, quote and supply the complete pump station package: pumps, tank, controls, covers and fittings, delivered to site anywhere in Australia.
- Sized from your drawings or duty point
- Quoted within 24 to 48 hours
- Delivered to site Australia-wide
How project supply works
- Send the jobHydraulic drawings, a duty point, or the pit depth, discharge run and power available.
- We size itPump selection to your duty, storage, controls, covers and fittings, checked by our engineering team.
- Clear written quoteUsually within 24 to 48 hours, listing exactly what is and is not included.
- Supplied to siteFast dispatch once paid, delivered to site anywhere in Australia, freight quoted per project.
Pump stations sized to your drawings, not a catalogue
Most commercial pump stations are not an off the shelf box. The duty comes from the hydraulic design, the pit is often already poured, the rising main is longer than a house would ever need, and the controller has to talk to the building management system. We read the drawings, size the pumps to the duty point, and supply the full package so your plumber and electrician can install it without chasing parts.
We supply builders, civil and plumbing contractors, mine and remote site contractors, hydraulic consultants and councils, from a single replacement pump through to dual duty and standby stations with long rising mains.
What we supply
Sewer pump stations
- Single and dual (duty and standby) packaged stations, 250 litres to 2,000 litres and larger custom tanks
- Cutter and grinder pumps in 240V and 415V
- Pumps and controllers only, for pits poured on site
Stormwater and drainage
- Basement and car park stormwater pump sets
- Dual drainage stations for flood storage sumps
- Submersible drainage and double channel pumps
Controls and alarms
- Dual pump controllers with duty and standby alternation
- High level alarms with strobe and siren
- Volt free fault contacts for BMS connection, where specified
Covers and fittings
- Class A, B and D access covers and trafficable lids
- Guide rail systems, valves and discharge fittings
- Rising main pump selection for long or small diameter mains
What to send us for a fast quote
- Drawings: the hydraulic plan and pump station detail if you have them.
- Duty: design flow in litres per second and total head, or the fixtures and dwellings served.
- Pit: new packaged station or an existing pit, invert depth, and internal size.
- Discharge: rising main length, diameter and material, and the highest point it climbs.
- Power: 240V single phase or 415V three phase, and any BMS or alarm requirements.
- Site: delivery address and lid class needed (Class B for driveways, Class D for roads and heavy vehicles).
Not sure of the duty yet? Our free pump station sizing calculator gives a first estimate of storage, flow and head from the fixtures served and the pipe run.
Supply terms in plain English
Every quote lists exactly what is included and what is not, so there are no surprises on site. Payment is required before dispatch. We dispatch fast once paid and deliver to site anywhere in Australia, including remote mine and regional sites, with freight quoted per project. Installation and electrical connection are carried out by your licensed plumber and electrician.
Choose your application
Brands we supply
- REEFE
- Kwikflo
- Aline SABRE
- BlueSelect
- Pedrollo
- Hyjet
Plus custom-built stations, pumps and controllers sized to your drawings when a standard package does not fit.
- Founded by a water engineerMonash trained, with more than 10 years in the Australian water industry.
- Australian ownedWaternex Australia Pty Ltd, ABN 54 688 776 721.
- Built for licensed tradesPackages supplied ready for your plumber and electrician to install and connect.
Common questions
Can you size a pump station from our hydraulic drawings?
Yes. Send the drawings or the duty point and we size the pumps, storage, controls and covers to suit, then send a written quote listing everything included.
How fast do you quote commercial pump stations?
Most commercial quotes go out within 24 to 48 hours of receiving the drawings or duty details.
Do you deliver to mine sites and remote areas?
Yes. We deliver to site anywhere in Australia, including the Goldfields, Pilbara and remote Queensland and Northern Territory sites. Freight is quoted per project.
Can you supply pumps and controllers for a pit that is already built?
Yes. We supply pumps, guide rails, controllers, floats and fittings to suit an existing or in situ pit, sized to the duty.
What are your payment terms for project supply?
Payment is required before dispatch. Every quote is itemised so you can match it to your purchase order.
Send us your drawings
Email the hydraulic drawings or tell us the pit depth, discharge length and size, lift, flow and power available. We size it and send a written quote, usually within 24 to 48 hours. Prefer a form? Use our project quote form.